aquamatic80
Básico
Suboficial 2ª clase · 171 pts
Greater London, Greater London, United Kingdom
Miembro desde Dic 2010
Último en línea hace 12 años
aquamatic80’s puerto
7 barcos(Racing Boat) Genesis cat
This is a Genesis Cat 1045MM long, powered by a Leopard 3660 2550KV motor, through an Octura X435 prop, it …
(Pleasure Craft) Dominator
This is still in build stage, however, I have built one before, so I know how it will perform. (Motor: SC 6…
(Racing Boat) Topsy-Turvy
This is a self righting hull, that in fact doesn't, so I have filled the flood chamber with bouyancy foam, …
(Other) 2Fast 2Furious
This boat was rescued from the bin, and then stripped out and refitted, originally it had a 600bb motor, I …
(Racing Boat) Club 500
Purchased second hand as a fun boat, it runs quite nicely, apart from digging in on a tright hand turn at f…
(Racing Boat) Predator Outrigger MK2
This is identical to the MK1, however, it is about 75-80g lighter, which hopefully will reflect on the top …
(Other) Predator Outrigger Mk1
Built from a Plan found on the net, she is built from 1/8th and 1/16th marine ply, whilst the sponsons are …
aquamatic80’s blogs de construcción
4 blogsThis Is a Dominator 34" Hull, as built by Hydrafibre, Then Stratos Models, In the 80s. She will be powered by an SC61M ABC through a stra…
This Is a 34" Dominator, as built by Hydrafibre then Stratos Models In the 80s. It will be powered by an SC .61M ABC through a straight b…
Have mounted the motor on the mount provided,along with the servo.By using the 3600kv over the 5050kv, It will only need one battery, as …
just ordered the hull from R2Hobbies In Hong Kong, with postage It came out at A£42. The hull has a number of holes In both the top and t…
Subidas recientes
Última actividad
Última publicación hace 14 años
222 viewsDominator 34"This Is a Dominator 34" Hull, as built by Hydrafibre, Then Stratos Models, In the 80s. She will be powered by an SC61M ABC through a straight ball raced shaft to a 55x prop.
1 comment3,446 views(Pleasure Craft) DominatorThis is still in build stage, however, I have built one before, so I know how it will perform. (Motor: SC 61M ABC) (6/10)222 viewsDominatorThis Is a 34" Dominator, as built by Hydrafibre then Stratos Models In the 80s. It will be powered by an SC .61M ABC through a straight ballraced shaft, I have fitted Nav lights that I found lurking In the cup…
♥ 1 like1 comment2,895 views(Racing Boat) Topsy-TurvyThis is a self righting hull, that in fact doesn't, so I have filled the flood chamber with bouyancy foam, but it runs great. (Motor: Hobbywing 3600kv) (ESC: Hobbywing Seaking 60A) (9/10)222 views2Fast 2Furious second runThe second run was a little better, until one of the solder joints on the 3mm bullet connectors melted, so had to uprate them to 4mm168 views2Fast 2FuriousThis was the initial run, and I wasn't quite expecting the end result, you cannot hit the throttle this hard to start with. Oops1169 views(Other) 2Fast 2FuriousThis boat was rescued from the bin, and then stripped out and refitted, originally it had a 600bb motor, I fitted a 4mm flexI and strudder along with a watercooled mount and a Leopard 2869 5050kv motor it need…
222 viewsElectric MotorsHI Take a look at this site, as I gives a reasonable explanation http://www.fastelectrics.net/motors.php I hope thid helps1,560 viewsArowana 22.2" mono EP (Topsy-Turvy)This is an Arowana 22.2" mono EP hull, allegedly self righting, however, on it's maiden run I turned it too fast and flipped it, sadly the self righting didn't, and a hatch clip failed, the end result was that…220 views