#4992

Manofkent United Kingdom Básico

Marinero capaz  · 24 pts Westbury BA13 4TE, Wiltshire, United Kingdom Miembro desde Mayo 2018 Último en línea hace 7 años
11 Publicaciones
0 Seguidores
0 Barcos en el puerto
0 Blogs de construcción
8 Me gusta recibidos

Última actividad

Última publicación hace 8 años
Forum replyfuse holderI agree with using the ones from component shop. They do single and two gang and as well as using auto fuses (Halfords) the holder has an led that shows red or green depending on motor rotation direction.330 viewsForum replyTamarAs well as the nav lights there is a white running light and blue flashing beacon on the mast as well as a white stern light. At the forward end of the wheel house there a total of 6 deck lights. 2 in the deck…341 viewsForum replyTrent deck colourSomething else you may want to consider.. I sprinkle a small amount of fine bird cage sand onto the deck whilst applying the first coat of grey. it gives a pretty good imitation of the non slip surface on the …342 viewsForum replyVinyl letteringThanks for the tip. it so happens that my No2 son has the cutter device that runs off a pc so he is going to see about making a set. I know the size, so hope for the best.367 viewsForumVinyl letteringWith the demise of Barry's Model Lettering, where can one get lettering for RNLI lifeboats? Whilst BECC do the Bliss Yellow for the stern lettering and also the Bliss shadow to make up name plates their letter…5 replies599 viewsForum replyTrent deck colourhaving built a Trent and now onto a Tamar, the nearest colour I have found to the current RNLI livery is Humbrol 165 Medium Sea Grey.342 viewsBuild blog commentVosper Rescue -target towing launchI have built this from the plans as per instructions using the balsa/ply fixing with UHU Hart and it works well and the boat performs well. Had to source fittings etc from many places and those I couldn't (DF …775 views

Delete this post?

Será eliminado del sitio.

¿Descartar este borrador?

Tu borrador será eliminado y no puede recuperarse.

Tienes un borrador sin terminar

¿Qué te gustaría hacer con ello?