Lo último de la galería

2,624 posts · Página 91 of 219
Northumbrian
Midshipman
1 / 5
SLOTH
the hull had to be attached to the deck then i built it up to deck level now i am busy building the top & working rigs i purchased them from Peter Wiles
I am hoping to get on the lake when the weed disappears & that doesn't look like happening anytime soon 😡
Le gusta a keithtindley and jacko and
2 comentarios
  • DonnieboySuboficial
    It's amazing that every club I've seen so far has problem with weeds.we use to have access to a reflecting pool with no weeds at a civic centre,But they changed the rules.Any water deeper than 2inches required a life guard be posted.When people in the condos saw us down at the water they would bring their children down to watch the boats in the water.At the end of the night they would thank us for entertaining their children.All our members enjoyed doing this.City politics is a b___h.
    Le gusta a Northumbrian and suntugs and
  • jackoComandante
    woodbridge pond clear of weeds looked after very well
Mikep
Petty Officer 2ª clase
1 / 8
Dumas USS Crockett
Asheville Class gun boat model is 51” long weighs 22 lbs. hull covered with 2 layers of 2 oz. fiberglass cloth and resin. All plywood and balsa construction finished with fiberglass resin and Model Master paints. Working radar mast, turrets, desiel sound, whopper sound, general quarters sound, sierene. Power is MACK
Drives 12 volt system 2 x 2 6volt 3000 nimh each drive. Very fast in the water.
Le gusta a DELVEIN and reilly4 and
3 comentarios
  • DonnieboySuboficial
    Boat looked great.The boat ran just fine.Not too much over scale speed.It's good to have a little more speed to avert obstacles,especially oyher boats that don't know where they are.
    Le gusta a rcmodelboats
  • Joburg-sailorSuboficial 1ª clase
    Ooops, apologies Dumas USS Crockett, my video post ended up on yr site..should have been on SA Valour Class Frigate.
Mikep
Petty Officer 2ª clase
1 / 5
Sterling Emma C Berry
Model is 49” long and with ballast keel added weighs 17 lbs. hull is covered with 2 layers of 2 oz. cloth fiberglass cloth and painted with Krylon spray can paint. Hitec sail winch servo for main sail and standard servo for jib. Model has auxiliary 6 volt electric power to compincate for my sailing ability’s and wind conditions.
Sails are Mylar.
Le gusta a Ronald and Northumbrian and
Mikep
Petty Officer 2ª clase
1 / 7
Dumas Chris-Craft Cobra
Model is 28” long weighs 7lbs. Hull covered with 2 oz. fiberglass cloth deck covered with 3/4 oz. fiberglass cloth and resin finished with spar varnish. Power is MACK 5045 motor and 2 6 volt x 3000 nimh packs.
Le gusta a doghouse and RNinMunich
1 comentario
  • RNinMunichAlmirante de la flota
    Very nice job, luvly woodwork 👍👍
    At first I thought that was a swan sitting on the hatch in the first pic😲😁
    Cheers, Doug 😎
    Le gusta a Donnieboy
Mikep
Petty Officer 2ª clase
1 / 5
Sterling Runabout
All the feed back on my American Scout seamen on deck I think this will really get some colorful comments. Sterling runabout 30”
weighs 5 1/2 lbs. power MACK 5045 motor 12 volt 2 x 3000 nimh batteries. Pilots head turns with rudder movement passenger waves flag on elevator input while towing skier. Built to impress my granddaughters.
Le gusta a Brightwork and doghouse and
Mikep
Petty Officer 2ª clase
1 / 2
Sterling American Scout
American Scout C2 cargo ship power MACK 3-1 drive 12 volt 2 x 6 volt 3000 mah batteries. Harbor smoke unit model weighs 15 lbs.
Le gusta a Brightwork and Nerys and
6 comentarios
  • MikepPetty Officer 2ª clase
    Thanks for the kind words Glyn, Railings are straight pins cut to length and horizontal railing are Thread.
  • GlynReclutar
    Got it - they certainly look the part. Best regards,
    Glyn
Mikep
Petty Officer 2ª clase
1 / 6
Dumas Express Crusier
Dunmas kit MACk 5045 motors and hardware. Two layers of 2 oz. Fiberglass cloth on hull 3/4 oz cloth on deck Klass Coat epoxy paint . Model has cabin lights and running lights. Power 2 x 7.2 packs.
Le gusta a Ronald and Zdenek and
1 comentario
  • RNinMunichAlmirante de la flota
    Very nice tidy job Mike 👍👍👍 Lovely finish.
    Like the mahogany transom, might do that with my Sea Scout!
    Crew ain't bad either 😉
    Cheers, Doug 😎
    Le gusta a Donnieboy
RedRider
Suboficial 1ª clase
1 / 14
Commission 44347
This is a Dumas kit for a USCG Life boat 44' built in Curtis Bay Maryland Coast Guard yard. I've been working off and on this model for a couple of years.
Le gusta a Inkoust and doghouse and
1 comentario
  • ibobideReclutar
    I also have the same model, i struggled a bit with the balsa planking but eventually managed it. I was never happy with my UK version of the upperworks so ive since stripped it all down & am basically starting all over again but with the hull intact
    Le gusta a figtree7nts

Le gusta a

Cargando…

Delete this post?

Será eliminado del sitio.

¿Descartar este borrador?

Tu borrador será eliminado y no puede recuperarse.

Tienes un borrador sin terminar

¿Qué te gustaría hacer con ello?