Built originally in 1973 from a modav kit and powered by an Enya 35bbiii. Now running a 3548 brushless motor and 5800 3 cell lipo. Model in video was running an x35 prop with +/- 20 degrees of rudder, very sensitive on turns. Today's run was on x40 prop considerably faster with reduced rudder throw of +/- 15 degrees. Current draw was 30 amps max watts 376. Still too sensitive on turns.

Have just brought this vessel, Well made and light. it is of show quality complete with working navigation lights and blue beacons.
Rather fast too

Just a 2 minute tub test.
While adding her ballast!
She's a beast!
She must weigh in at 9 or 10 pounds!😲

Sterling Yacht America 51 1/2” long 8 1/2” beam 41” high. Model was built from kit has auxiliary electric power and Futaba sail wench servo. Model weighs 11 lbs and has a removable 2 lb. keel weight.

So close just the superstructure to do.. Even put.a 60kg long tow winch in lop full rewiring and she pulls like a train

scratch built, with out board motor,2 blade prop, 30 inche long, still need to install nav lights, chairs are from doll house, runs on Lipo battery, runs and turn excellant, and no that is not a beer in his hand it's a bottle of coke

Wianno Senior is the style of sailboat. The main sail is being installed in these photos. Looking forward to water testing soon.

Assembled in 1986. Came out of loft storage, fired up and R/C after 15 years, in August 2018. Shown here at Millbrook Lake, Cornwall. A Krick model - well documented for its origins on their webpages, but steam power arrangements have been updated from this, the so-called "Puffin" arrangement, which was the available and recommended one at the time 1.5 bar pressure and about 20 minutes running time, but often wind-dependent on keeping the gas flame intact!! With a condenser fitted, a very realistic model and great manoeuvrability... and fun!!

This pond yacht was bought for me by my daughter in a pretty poor condition from a car boot sale, I decided to tidy it up and give it back to her as a model for her home. 'True Balou' was her much loved 'Staffie'.

Newer photos of my 1/24 Scale scratchbuilt Fairmile D at Albert Park Lake in Melbourne, Australia. The conditions were good for realistic photos.

HMS Hood, a six month build from Trumpeter 1/200 scale kit.

My second scratch build. SA Navy "Spioenkop". 1:80 scale. 2 Mtroniks 600 motors on the scale 40mm (home made) props running on 6v and Hobbywing 860 brushed ESC. Jetdrive (also homemade) runs on a 550 motor (I think!) and a 1060 Hobbywing ESC running on 12v. Chopper is a heavily modified Hobbyboss RN Super Lynx. Hangar door opens as well as chopper moves on helideck with worm drive and magnets. idea is that this would happen sequentially ... but haven't managed to sort that out as I am "electronically challenged". Suggestions welcome!