Directorio del puerto
Springer #4 USACOE Stoplog
Especificaciones
- Eslora del barco
- 14" (35.56 cm)
- Tipo de motor
- Brushed
- Tipo de transmisión
- Direct
- Hélices
- Single
- Tipo de batería
- LiIon
- mAh de la batería
- 286 mAh
- Tipo de hélice
- 3 Blade
- Tamaño de hélice
- 40mm
- Tiempo de ejecución
- 358 min
- Velocidad del modelo
- 363 km/h (225.6mph)
Fotos
Acerca de este barco
This is my fourth Springer tug. It was built to resemble the U.S. Army's Corps of Engineers stoplog tug located at Little Goose Dam in Washington State. The scale is about 1/17. The model had to be modified slightly because the length to beam ratio between the real tug and a Springer are slightly different. This keeps the model within the Springer class rules.
Le gusta a
Cargando…
Comentarios
Iniciar sesión para comentar.
I built four Zippkits Springers and did the same hull finish for each. Sanded, coated with spar varnish (brushed on) filled voids with Testors model filler (JB Weld, or others should work), sanded, filled, varnished again until finish was acceptable. Sprayed on paint, usually Rustoleum (sometimes Walmart brand). For hulls and decks I go with the standard hardware store spray paints, no need to go expensive. Protects the hull just fine!
Hope this helps.
Lew 😮