Especificaciones
- Eslora del barco
- 35" (88.90 cm)
Fotos
Acerca de este barco
This is the most straight forward of the Bearospace designs. It sails very well and was a pleasure to build. There's lots of help to be found on the designer's Youtube channel. The bulk of the materials came from B&Q, they sell a 3.2mm thick plywood, which when measured is more like 3mm. The construction was completed using West Epoxy with some filler, to create fillets on the inside.
http://www.bearospaceindustries.com/boats2.html
http://www.bearospaceindustries.com/boats2.html
Le gusta a
Cargando…
Comentarios
Iniciar sesión para comentar.
You should also put the YouTube link here to see it.
I saw your channel, admired your models and therefore I know it but many model makers don't.
Does she sail backwards as well? 😁
😎
Let me know as I am in communication with Gary Webb about trying to create an alternative design of the Fin Keel which should eliminate getting hung-up.
Ronald
One thing I will be changing is the loop arrangement around the traveller. What you have done is so simple yet will give more adjustment.
Will be putting mine in the water for the second time this weekend so hopefully I will get some of the changes done by then.
Trev
Here are All of Gary’s videos, Enjoy!
Thanks for sharing
Trev
How the rudder was constructed and changing the jib "set up" to a balanced boom, which helped keep the jib in shape, were two of the more obvious.
You can see Sparkle Gary’s sailboat briefly in this opening sequence of this video.