Directorio del puerto

Huntsman 31 1:10

Listado por renew ·

Especificaciones

Eslora del barco
31" (78.74 cm)
Peso del barco
204g (7 oz)
Tipo de motor
Brushless
Tipo de transmisión
Direct
Hélices
Single
Amps máx.
274A
Tipo de batería
LiIon
mAh de la batería
289 mAh
Tipo de hélice
3 Blade
Tamaño de hélice
40mm
Tiempo de ejecución
352 min
Velocidad del modelo
376 km/h (233.6mph)

Fotos

Acerca de este barco

My build of the huntsman 31, scale 1:10.

Comentarios

  1. RogerA1
    Suboficial
    Looks good I’m building the smaller one, but haven’t done much lately, it’s inspired me to get back on it
    Thanks
    Le gusta a renew
  2. ChrisFBronze
    Almirante
    Thanks. I based it on a method shown by a guy on the Mahem forum. Thin planking, 0.5mm thick, is glued onto a thin ply base which is then glued onto the deck. One advantage of this method is, that as you do it off the model if you are not happy with it you can do it again. I had to do this with my Huntress as it is a bit fiddly and the planks can split as you force them to curve.

    More information is given in my builds on the Model Boats Magazine forum under Build Blogs.

    Chris
    Le gusta a hermank and renew
  3. ChrisFBronze
    Almirante
    I agree about the size, I had one of the 1:8 ones, which was a lovely model, but found it too cumbersome to move around and launch. Yours will be a nice size.

    I'm building mine at 1:12 to match a Huntress I have, as well as a Swordsman, which at 33" is nearing the limit of how big I want to go. I do intend to build something around 35" but that will be it.

    Chris
  4. renew
    Petty Officer 1ª clase
    I bought the 1/16 scale drawing. Boosted that with 50% on my scannner. Printed that out
  5. ChrisFBronze
    Almirante
    Interesting scale, not come across one of that size before, which must be about 37" long. I'm guessing you adjusted the size of some existing drawings?

    Following with interest.

    Chris
    Le gusta a renew

Delete this post?

Será eliminado del sitio.

¿Descartar este borrador?

Tu borrador será eliminado y no puede recuperarse.

Tienes un borrador sin terminar

¿Qué te gustaría hacer con ello?