HMS Flirt, built by Palmers of Tyneside in 1897. It was a C class aka Star class three funnel 30 knot destroyer. Twin reciprocating steam engines.
The model is 1/72 scale, 3ft long. I have some figures to stick on yet as well as the torpedo davits and the ship's boats.
The model has twin electric motors and is controlled by a Flysky 10 channel radio. The motors can be run synchronized or independent, selected with one of the switches. The left knob rotates the forward gun and the other knob rotates the torpedo tubes.
The model is entirely scratch built. Fiberglass sheathing balsa for the hull. The funnels and cowl vent are 3d printed to my files. I now have a 3d printer which I'm sure will make many fitting for future models.

As far as I know, there is not a model boat club at Madrid. However, modellers gather Sundays at 10:30 to sail at a pond -actually a set of four connected ponds-, located in a municipal park, in the south of the city. Access is free.
The boat in the video is a sidewheeler, scratch built by my good friend Eduardo Yraola, who is a far more accomplished modeller than I am. She has steam propulsion, and sails at a majestuous pace.

Here's my scratch built model of a Gundalow. in their final iteration they were lateen rigged cargo hauling workhorses of the New Hampshire and Maine estuaries from the mid 1600's thru very early 1900. Flat bottomed with a very shallow draft that allowed sailing (or following the tides/currents) to ports upriver with needed supplies and returning with cargo of all types. My model is 50" in length. It is used as a display model for The Gundalow Company in Portsmouth, NH. I also use it with historical presentations I give to schools, historical societies and libraries. The model is fully functional. While not radio controlled it has the ability to float.

Built by Buxton Model Boat Club member Adrian , he says :- "essentially the paddle boat is scratch built but uses some fittings and materials from a Disar "Vanguard" kit ".
Adrian used drawings of "Flying Scotsman" for inspiration, but is not a faithful reproduction, although "Old Trafford" is also quite similar .
This was the maiden voyage so plenty more work to be done on detail and ballast etc.as the boat still sits a bit low in the water.
For reference see :- http://tynetugs.co.uk/
http://www.tynetugs.co.uk/oldtrafford...

This is nuts but I’m already designing what my scratch built rescue boat will look like.
I’m hand drawing all of the lines on tracing paper in case that I need to change something but in the next few days I will clean it and finish it so you guys could see it.
After complete I will build a separate contraction somehow looking like this one that could be assembled whenever is needed and taken off to carry away.

If you guys don’t mind, I would like to your version of your rescue boats.

This my version of the Friendship sloop, also known as a Muscongus Bay sloop or lobster sloop, is a gaff-rigged working boat design that originated in Friendship, Maine around 1880 and has survived as a traditional-style sailboat.
This build is from an old Laughing Whale model and was given to me by the son of a great model builder that has passed away.
I know that this kit is r/c friendly but I did it as a static model.
Everything from the rub rails up is entirely scratch built. The Eagle figure head was hand sculpted.
Again I hope the model is to you guys’ liking.

With all the members permission I would like to share my Galilee Boat project.
Here is a brif story of how I got my hands on the model.
I have to mentioned where I got this kit from because is always good the real story behind the kit.
The place is "SE Miller Guitars". http://www.semillerguitars.com/sea-of-galilee-boats/.
Scott Miller owns the business and I asked him how he came to produce this now famous boat kit.

This was his exacts words:

I was a moderator at MSW when Captian Pugwash was running the site and had just moved on from building kits to scratch building. I did the Triton cross section build that was going on at the time and that got me interested in building models other than standard scale ships. This lead me to building boat models because they are fun to build and can be done in much less time than a three master ship. The also don't require a lot of rigging which was attractive to me as well.

One model that was fun to build and could easily be scratch built was Midwest's Peterborough canoe kit. I made quite a few of these as gifts and this introduced me to building on a strong back and using thin CA glue to weld planks together

I started looking at different boats that I could model and found that no one offered a Sea of Galilee boat model kit other than a paper one from a German company. I found an excellent book by Shelly Wachsmann about the discovery of the Kinneret boat and that book had a set of ships plans in it. I used those plans plus what I had learned from building Peterborough canoes to build the first 16" Sea of Galilee model.

South Devon Crabber :- Cygnus GM 32' 1/12 Scale. Donor hull 32" fitted out/scratch built. Replica of actual vessel that floundered off Weymouth in 1983. Model build started in 1981 and completed in 2018 !!!

I know this is not one of my boats, but belongs to one of our club members. It is a 1/48 scale model of a "whaleback" freighter. The real George Washburn was built in 1885 had a length of 320 feet. What is unique about this is it had a almost tubular cross-section hull. Many times I heard visitors call it a submarine.

Jim's model includes horn sound, lights, homemade smoke generator and a ballast fill/empty system to reduce transportation weight. Video Link (this is not on YouTube, you have to copy this link to your browser to see the video): http://ssmbc-fl.org/Videos/Video-03-30-2014-01.mp4 (😮The link icon below WILL NOT WORK!😮)

I though some of you might enjoy this wonderful scratch built model!

Lew

From a design concept incorporating an old power boat destined for the rubbish tip ! - to a functional Camera platform to capture some of the fantastic models that sail at our local venues.

The emerging creation ( all be it rough and ready !) will incorporate rotating fan motor and 360 degree rotating camera with live feed FPV camera.

My enjoyment is to capture the the skill, time and effort that fellow modelers put into their creations - whether they be they scratch built, own designs, kit sets or off the shelf.

As Requested :- Link to previous Camera Boat (SwampDawg)
** **

Brian Clewes brought along a nice example of his scratch built Master Hand retired fishing boat, for a sail. When larger more powerful mechanised boats were introduced this type was abandoned. Many were rescued and turned into pleasure / racing type craft and that is what this model depicts. Not seen for some years but is ageing well. The static pics will be of interest to any modeller considering making a scale sailing ship of this type. I did film some video and will share this later when edited.
enjoy
Dave

Scratch built motor gun boat from Bangladesh.
Tried my best to upgrade it into a brushless one. First attempt was brushed and it was kind of a pain in the ass.
It runs far better now.