Just a few photos of the Three Musketeers sailing on Sunday 19th July. We seem to be the only three that turn up on a regular basis. Just so happened there was a young lady photographer (Inga Zaiat) taking pictures around the lake. She asked if she could take some of us and the boats. From left to right Myself, Arthur & Ian. Arthur picked up the Victoria for a song at Model Boat Mayhem and after a bit of tinkering we had it up and sailing. Considering the sails are in poor condition it sails very well. Ian's boat is a second hand DF65 and mine (Red one) is built from plans out of the Model Boats magazine but does have a purchased DF65 rig. All good fun. PS. I uploaded the photos in low res as they take up less space and load faster.

Hi all, I thought I would Sher with you a few photos of my paddle steamer I have just Made! it is not from any plans! it came from my head!!! I hope you Like? Brian.

The Tamar lifeboat was the first to be fitted with an integrated electronic Systems and Information Management System (SIMS), allowing the crew to operate the all-weather lifeboat from the safety of their shock-absorbing seats.

When crashing through the waves, the Tamar’s pioneering seat design absorbs most of the energy on impact, reducing the strain on crew members’ backs.

The Tamar is designed to be launched from a slipway – her mast and aerials can be lowered to fit inside a boathouse – and she can also lie afloat.

Tamar class lifeboats have gradually replaced some of our Tyne class lifeboats that have reached the end of their operational lives as part of our plans for a faster and more efficient 25-knot all-weather lifeboat fleet.

Following a tradition of naming our modern lifeboats after rivers, the Tamar is named after the Tamar River, which is 50 miles long and forms a natural boundary between Devon and Cornwall.

I need to stay off the internet, LOL
Noticed an ad for an Estate Sale. I went, I looked, and found (i.e. bought).
The Midwest Rowing Dinghy, Canadian Canoe, and Chesapeake Double Kayak are all nice boats.
They will look nice in a Diarama or just on display in my Home Office or Family Room.
I plan to do some work on the Cranberry Isle Lobster Yacht. It was not built/finished to run.
I'd like to open it up and put running gear and electronics in it to make it a working RC.
The front opens to access where the motor and electronics would go, but the rear is sealed tight with no access to attach a servo to the rudder.
Does anybody know where I could download the plans/instructions for this boat? I would like to see how the rear is constructed before attacking it.
Thanks for the help!
Dave B

Has anyone seen a model or plans for a boat like the one I found on holiday. I was in Elounda Crete when I came across this and thought what a lovely model it would make.

Built from Hampton fishing boat plans in 2018
Converted to hybrid in 2021 - Sails replaced with dericks and 5 blade prop gets fitted.
Becomes a Lobster boat.

Over 20 years ago I was given this F/G hull and the plan but in several moves the plans were lost.
Can any one identify from shape of hull what class she is. The photo I had showed a large canvas cover suspended over the stern deck as if she was in warmer climate.
Many thanks
AustinG

Others may wish to consider building a dory too. I got the plans for mine from John Gardner’s book “ The Dory Book”, it’s available from The Wooden Boats store.

https://www.woodenboatstore.com

With all the members permission I would like to share my Galilee Boat project.
Here is a brif story of how I got my hands on the model.
I have to mentioned where I got this kit from because is always good the real story behind the kit.
The place is "SE Miller Guitars". http://www.semillerguitars.com/sea-of-galilee-boats/.
Scott Miller owns the business and I asked him how he came to produce this now famous boat kit.

This was his exacts words:

I was a moderator at MSW when Captian Pugwash was running the site and had just moved on from building kits to scratch building. I did the Triton cross section build that was going on at the time and that got me interested in building models other than standard scale ships. This lead me to building boat models because they are fun to build and can be done in much less time than a three master ship. The also don't require a lot of rigging which was attractive to me as well.

One model that was fun to build and could easily be scratch built was Midwest's Peterborough canoe kit. I made quite a few of these as gifts and this introduced me to building on a strong back and using thin CA glue to weld planks together

I started looking at different boats that I could model and found that no one offered a Sea of Galilee boat model kit other than a paper one from a German company. I found an excellent book by Shelly Wachsmann about the discovery of the Kinneret boat and that book had a set of ships plans in it. I used those plans plus what I had learned from building Peterborough canoes to build the first 16" Sea of Galilee model.

Bunker Boat-
A bunker boat is a purse seiner after menhaden (AKA bunker, pogy, alewife, shad). The fish is use in animal feeds, fertilizer, paint, cosmetics, and its oil has commercial value, It's not a human food fish. The Atlantic seaboard is the largest fishery and a huge fleet of these boats, all architecturally similar, were maintained there. Some sources call the menhaden catch the most important commercial catch in American waters.
The plans for this model are loosely drawn after the Helen Euphane, a 114 foot 293 ton steam powered example of the type. She was built in 1902, and served temporarily in both world wars in the Coast Guard, as a minesweeper and patrol boat. The last history I have of her is from the 50s, at which time she was still working the fishery.

Built plank on frame from plans scaled down from 24 -12th scale - "Branksome" was built by proud owner Alan Brundrett many years ago, originally steam powered, Alan converted her to electric in recent years.

Hello again, here’s a picture of an M class destroyer which I built some years ago, she is of again balsa construction from Model Boat Magazine plans, I built over one winter about 9 years ago, she is sealed with dope and tissue which gives a smooth finish, the guns were constructed from plastic card, with brass rods for the barrels!
She was retired a couple of years ago, but recently she was brought out retirement and gifted to family friend was showing an interest in battle ships!