Lo último de la galería

2,627 posts · Página 76 of 219
wunwinglo
Suboficial 1ª clase
1 / 2
Vosper RTTL at OXFORD
This very large Vosper RTTL was active at the Oxford Model Boat Club open day on the 7th July. At aprox 6 feet long, it is the work of Terry Gregory (hull and electronics) and Paul Izzard( superstructure). It is a spectacular performer and beautifully finished though the enormous wake means that it is normally run solo on the water.
Le gusta a BOATSHED and Brightwork and
1 comentario
jbkiwi
Almirante de la flota
1 / 6
36" Maiami Crash boat used for camera boat.
Made this in about 6 weeks for my son who was not interested so I now use it for general on water filming etc. It was scratch built from a few photos and is all balsa construction, sealed and painted. Powered by a single 12v 380 motor with a 28mm 3 blade prop. Runs flat out at around 15,000 rpm.
Le gusta a BOATSHED and Brightwork and
13 comentarios
  • jbkiwiAlmirante de la flota
    I haven't run nitro boats for a number of years now Doug, same with the planes, everything has been converted to electric long ago, (all the nitro planes included.) No more mess and smell of burnt fuel in the house, no having to take a roll of paper towels and soap sprayer and wash your plane or boat before putting it in the car, and no more having to put a plastic 'nose bag' on the planes to hang them up so you don't get oil dripping on your carpet!
    Re- Graupner 'Premium Line', certainly sounds like their quality has dropped, you couldn't fault them in the 70s, gone the way of all the others due to competition from the home of Oolong tea by the sound of it.
    Le gusta a RNinMunich
  • RNinMunichAlmirante de la flota
    "everything has been converted to electric long ago"
    Know what you mean John.
    I've still got a 5ltr canister of pepped up glow fuel kicking about in the cellar.
    Probably degenerated into uselessness by now🤔
    Maybe I'll stick in the car or use it to start the barby😊

    Re Premium line-
    Belfast wasn't so bad, but had the same crappy plastic props held on with grub screws.
    So she's getting threaded shafts and brass props from Raboesch 😉
    On Graf Spee though I noticed a lot of resin casting faults, evidence of air bubbles and smudged detail, as well as over / under-spray in the painting and lifting of the wooden decks.
    Had to inject liquid CA glue round the edges to stop it peeling ☹️😠
    Best thing on both ships were the faultless hulls with double skinning!😉
    One thing surprised me with Belfast though-
    the recommended SLA batteries don't fit! I couldn't get them in any which way 🤔
    Not to worry, they go in my 1:72 destroyer with ease 😊
    BTW I prefer lapsang souchong 😋
    Le gusta a jbkiwi
Commodore-H
Comandante
1 / 1
USCG Sprinkles in Action
Hope this posting works. It's a short video.

Too hot to go out today

Rotating beacon is R/C car accessory.

Radar is modified servo.

Water monitor is scratch built with cheap pump from ebay. Draws water from outside boat . Turns with servo.

Searchlight scratch built with ultra bright led.
1 comentario
  • RNinMunichAlmirante de la flota
    Sorry Commodore (!)
    That won't work 🤔
    You have to put the video up on YouTube and then post the link here.
    Doug 😎
Seaspray
Suboficial
1 / 4
Research Vessel Meteor
This is my latest build and first time at scratch building. Other than the hull I've done everything else so far and learned a great deal in scratch building. The hull was built for me by John Elsy of Newcastle as I had no experience of lifting details from the basic layout plan I had, but will learn this soon. Various stages in the build to date. it has a Graupner 500 ECKO motor pulley drive. Motor sits above the propshaft on special engine mount and the shaft has an oiler. 2 ch Futaba `T2ER 40 MHz radio which is all hidden under the false planked aft working deck. it will run on a 12v 7amp gell cell battery with a FR30HX Electronize ESC. Currently building one of the cranes.

H.Martin Stevenson
Le gusta a figtree7nts
Seaspray
Suboficial
1 / 4
King George 5th Battleship
This is my model of the KG5. Futaba 2 ch, electronize ESC, 12v 7amp gell cell battery. The motor is from a Ford radiator fan and pulls 1 amp current. Scratch built in the 60.70s and revamped in the 90s by myself. it is 1/96 scale @ 72 inches long and a width of 14 inches.
Le gusta a figtree7nts and MouldBuilder and
jugge
Petty Officer 2ª clase
1 / 3
Fairmount Alpine
Hello boat builders
it is a step closer to an AHT
i am going to install all elektronik and test her in the bathtub
Have a nice weekend to all of you
Le gusta a Ronald and Brightwork and
4 comentarios
RNinMunich
Almirante de la flota
1 / 1
HMS Hood.
Foredeck Detail.
Anyone looking for details of Hood's foredeck equipment can't do much better than this photo I just stumbled across👍 While looking for something completely different of course🙄
Doug
Le gusta a Brightwork and MouldBuilder and
7 comentarios
  • RookysailorContralmirante
    Many thanks Doug, can't have too many piccy's of HOOD, nice shot though. getting late so time for Schlafen now,
    Danke vielmals Doug und gute Nacht😐

    Peter
    Le gusta a RNinMunich
  • RNinMunichAlmirante de la flota
    Hi again,
    You should find this link useful Peter.
    It's to the HMS Hood Association and their review of the Trumpeter 1:200 kit, with lots of detailed improvement suggestions with appropriate photos!
    Cheers Doug 😎 Schlaf gut 💤💤💤
    http://www.hmshood.com/hoodtoday/models/trumpeter/trumpeter200.htm
maersk-topper
Marinero destacado
1 / 17
Offshore meeting 2019 , Hamburg Germany
In the weekend of 24-26th we had a offshore meeting in Hamburg Germany.
Le gusta a CKAbney and Brightwork and
7 comentarios
  • HughMaster Seaman
    Amazing detail! Any interior shots?
  • Paul33Master Seaman
    Amazing workmanship, pleasure to view and very envious.
    👍
JOHN
Midshipman
1 / 3
HMS EXETER
Here are pictures of HMS Exeter - I built her over a period of time plank on frame hull, covered in styrene to simulate plating on the hull. The deck is all planked with individual planks - the guns are fully rotating and elevating but not firing :-).

John
Le gusta a Brightwork and jbkiwi and
10 comentarios
  • JOHNMidshipman
    Hi there
    senile moment for me :-) as there is already a short build of HMS Exeter on here if you do a search - you will come across the build by me and there are some closeup pics on there.

    John
    Le gusta a RNinMunich and Martin555
  • andyhynesMarinero destacado
    Excellent job.
JOHN
Midshipman
RTTL IN SLOW MO
here's a short clip of my RTTL tearing up the lake :-) she has 2 MTroniks 600s driving 30 ml brass props both rotating in the same direction as in the real boats and she has 2 x 4300 mAmp ni-cad batteries in. Lasts for about 15 mins full chat :-)

John
Le gusta a Brightwork and Inkoust and
1 comentario
  • andyhynesMarinero destacado
    Goes like a brushless motor set up. Good job

Le gusta a

Cargando…

Delete this post?

Será eliminado del sitio.

¿Descartar este borrador?

Tu borrador será eliminado y no puede recuperarse.

Tienes un borrador sin terminar

¿Qué te gustaría hacer con ello?