At the moment I'm not sure if I will put the launch I'm working in in the H2o
But if I do any tips for the best buy for very small operating system.
As I pointed out in my first posting I have scaled back the size for the parts I'm 3D printing ( My entry level printer couldn't handle the full size files)
Haven't had much luck web viewing for an answer .
The boat will have twin motors , prop tubes about 15 cms long 6m dia the motor bays are 23 mm dia .
It has very little space below the deck , I'm wonder should I make it a static model of give the pond a go Col.
As I pointed out in my first posting I have scaled back the size for the parts I'm 3D printing ( My entry level printer couldn't handle the full size files)
Haven't had much luck web viewing for an answer .
The boat will have twin motors , prop tubes about 15 cms long 6m dia the motor bays are 23 mm dia .
It has very little space below the deck , I'm wonder should I make it a static model of give the pond a go Col.
Le gusta a hermank and AlessandroSPQR