Hey guys, finally got some time to start on my trailer. I am using 1/2" aluminum channel for the main rails. Tamiya 1/14 Semi truck leaf springs and mounts, 13mm aluminum axle housings with stainless steel axles. 1/10 touring car rims with Tamiya 1/14 truck tires (85mm diameter). I am also using old printer parts for the roller setup on the trailer. I am going to attempt to weld the frame with low temp alumiweld 700 degree Fahrenheit melting point.( first time trying this stuff so we will see....) I will update soon. Thanks, Dave RR

Update on the trailer. Added all my cross members. I used screws and nuts to attach everything. The low melting point alumiweld did not work out on my tests. I couldn't get a good bond. It might be me... I'm not sure. Working on bow bumper, tail lights, trailer jack and tongue, safety chains, fenders and details before I paint. Dave RR

Working in a functional trailer jack. I am using an old telescoping mirror that was broken. (2 sections) were cut out. Brass sheet for the wheel mount. Wheel is from scrap box. Brass wire and a rivet body for the crank handle. If all goes well I will have this done today. Will update soon, RR

I used this long screw. I ground and filed the nuts to press fit into the end of the cylinders. The double D shape keeps the ram from spinning. It works perfect. Crank handle is brass wire with a rivet for the handle. Retracted length is 3.5 inches and fully extended is 5.5 inches. Working on the mount today. Also working out other bits like lighting, safety chains, end caps, etc. I will update again soon, Dave RR

I have the mount made up and jack installed. I think I will redesign the crank handle. Works like the real thing (not that really matters). Also got the fender mounts finished, nice and solid. I'm happy with the result. Thanks, Dave RR

This is the last update before I take it apart and paint. Now my question is what is a good paint for aluminum? I tried Rust-Oleum etching primer and black paint but it peals right off. Can you acid etch and then paint? Any help is much appreciated Thanks RR

Thank you all for the tips, it is always helpful and informative at model boats. Here is a couple pics before I disassemble for painting. Will update soon. Thanks again to all who have helped along the way. Dave RR

Hey guys, got the trailer painted. Primed with aluminum primer and a basic black. I tried for the first time applying car wrap vinyl on the fenders (guards). You apply it with a heat gun and stretching the vinyl over the compound curves. Looks close to chrome but not quite...good enough for who it's for 😁. Thanks, Dave RR

Finished the SK trailer up for the most part. I lost the 4 o-rings that go on the gold rollers. And I am waiting for my winch hook. I used rubber neoprene strips for the rails and bow rest. Now I am working on my tow vehicle. 28" long to match 1/6 scale. The captain and first mate fit the car too. Wifey thinks I might be a little crazy 🤪 but I'm having fun with it. On to the next project...another trailer/stand for the CC. Just want to say thanks for all the help and suggestions! Dave RR